Ecopro Silicate Primer 1ltr, 5ltr, and 10ltr

from £12.00 (inc VAT £14.40 )

Earthborn Ecopro Silicate Primer is a base coat primer for use with Earthborn Ecopro Silicate Masonry Paint. It can be used to stabilise any mineral surface that is very absorbent or powdery. The primer can also be combined with Earthborn Pigments to create a colourwash finish on external concrete and plaster surfaces or any surface that has been painted with Silicate Paint.
Water based and VOC free, allowing walls to breathe.
For Orders or Advice Please Call Us On
01653-648566
Category:
Where to use Internal and external walls
Substrate Porous mineral surfaces e.g. stone, masonry, concrete, pebble dash, plaster and sound silicate-based paint surfaces
Preparation Surface must be clean, dry, absorbent and dust/grease free. For interior use, remove all loose plaster and apply filler as appropriate. All coats of water-soluble distempers and lime paints must be removed or washed back to sound before applying Silicate Primer. All other surfaces should be washed down thoroughly. Gloss, lacquer, acrylic or oil-based paints are not suitable surfaces for Silicate Paint system, and must be removed. Take care to mask all adjacent glass, metal and ceramic before use.
Application Do not use if the working temperature is below 8°C or expected to fall below 8°C within 24 hours of application. Stir the paint well before use.
Apply with a brush or roller in a thin, even, well-spread coat.
Allow each coat to dry before applying next coat.
Tools Brush or Roller
Tin size 1L, 5L,10 litres
Colours Clear
Finish
Coverage Approximately 5-7 sq m per litre.
Drying time Dependent on the temperature and humidity, touch dry after approximately 1 hour but allow a minimum of 12 hours drying time between coats and before applying Silicate Paint.

Reviews


There are no reviews yet.

Be the first to review “Ecopro Silicate Primer 1ltr, 5ltr, and 10ltr”