Where to use | Internal and external walls |
Substrate | Porous mineral surfaces e.g. stone, masonry, concrete, pebble dash, plaster and sound silicate-based paint surfaces |
Preparation | The surface must be clean, dry absorbent and dust and grease free. Take care to mask all adjacent glass, metal and ceramic before use. Gloss, lacquer, acrylic or oil-based paints are not suitable surfaces for Silicate Masonry Paint system, and must be removed. |
Application | Prime the surface with one coat of Ecopro Silicate Primer and allow to fully dry before applying Ecopro Silicate Masonry Paint. Important – do not use if the working temperature is below 8°C or expected to fall below 8°C within 24 hours of application. Stir the paint well before use and at regular intervals during use. Ecopro Silicate Masonry Paint can be applied with a brush, roller or spray gun. Apply thin, even coats. Keep a wet edge while painting and complete each wall/section in one go. Apply the second coat in the opposite direction to the first coat. Apply the first coat diluted with up to 20% Silicate Primer. Ensure each coat is dry before applying the next coat. Any paint splashes should be washed off immediately with plenty of water. |
Tools | Standard brush, roller or suitable spray gun |
Tin size | 5L, 10 litre and 100 ml |
Colours | 24 Colours |
Finish | Matt |
Coverage | Approximately 5-7 M² per litre |
Drying time | Dependent on the temperature and humidity, touch dry after approximately 1 hour but allow 6-12 hours drying time between coats |
Home/Shop/Breathable paints
Earthborn Ecopro Silicate Masonry Paint
For Orders or Advice Please Call Us On
01653-648566
Ecopro Silicate Masonry Paint is a highly durable mineral paint that dries to a classic, matt finish. Being highly breathable yet water resistant it offers an alternative to traditional lime based and conventional coatings |
Reviews
There are no reviews yet.